
The Bucket Test: Is Your Orlando Pool Leaking or Just Evaporating?
Orlando pools lose water to evaporation, especially on hot, windy, sunny days, and summer rain can hide a slow leak by topping the pool back up. Before paying for leak detection, a simple bucket test can tell you whether you are losing more than evaporation.
What you need
- A 5-gallon bucket
- Waterproof tape or a marker
- 24 hours without rain or topping off
How to do it
- Set the bucket on the first or second step so it sits in the pool water.
- Fill it with pool water until the level inside matches the pool.
- Mark the water level inside the bucket and on the pool or skimmer.
- Run the pump on its normal schedule for 24 hours.
- Compare. If the pool dropped noticeably more than the bucket, you probably have a leak.
- Repeat with the pump off for 24 hours. More loss with the pump on points toward pressure-side plumbing; loss either way can point toward the shell, light or suction side.
Next steps
Write down both results. A leak detection pro can use them to narrow down where to look, which saves time.
Want a local pro to take a look?
Request help onlineFree referral to an independent Greater Orlando business. Requests accepted 24/7.
Sources and local resources
Sources checked November 19, 2026. Local rules change; confirm details with the agency.